SURGICAL / EASY X-TRAC SYSTEM / EASY X-TRAC DRILLS, 3 PACK

Easy X-Trac Drills, 3 Pack

Surgical (XT 110)

$82.99

Part of our Easy X-TRAC System. The set of 3 drills (1.1mm, 1.3 mm, 1.5mm) are used in succession from smallest (white) to largest (bue), to drill down into the root canal and prepare the patients site for the self threading screw.

The 1.3mm Easy X-Trac Drill is marked red and is used after the white 1.1mm drill to prepare the root canal when using the Easy X-TRAC System to remove a root from the socket with no tissue damage or post-traumatic swelling. Steps to effectively using the drills while performing a minimally invasive extraction using the Easy X-Trac System are as follows:

Step 1. Shorten the tooth

Shorten the tooth by using a common diamond bur in order to gain easy access to the root canal.

Step 2. Prepare the root canal

Only use the specially designed Easy X-TRAC root canal drills. The recommended speed is 8,000 to 10,000 rpm.

The 3 drills are color coded, indicating 3 different diameters. Start with the thinnest drill (white), and work your way up to the largest diameter drill (blue), in order to accommodate the X-TRAC Screw.

Fully insert the drills, using the entire thread area of the drill.

Tip: We recommend moving the drills up and down several times to completely bore out the canal! One way to avoid breakage would be to start with the smallest (half way down) then the medium drill 1/2 length. Then the smallest to full length followed by the medium and large full length. Then place post.

Download Easy X-Trac Brochure - Front

Download Easy X-Trac Brochure - Back